Panasonic DMC-FX48 User Manual
Page 60
VQT1X57
60
Advanced (Recording pictures)
Press
3/4 to select the item and then press [MENU/SET].
•
[
] can be enjoyed on the TV as high quality motion picture by using the component
cable (DMW-HDC2; optional). Refer to
“
Playing back on the TV with component socket
”
(P104) for details.
¢Cannot be recorded in the built-in memory.
Press [MENU/SET] to close the menu.
•
You can also press the shutter button halfway to close the menu.
Note
•
The flash setting is fixed to [Œ].
•
Refer to P122 for information about the available recording time.
•
The available recording time displayed on the screen may not decrease regularly.
•
Depending on the type of the card, the card access indication may appear for a while after
recording motion pictures. This is not a malfunction.
•
When motion pictures recorded with the camera are played back on other equipment, the
quality of the picture and sound may deteriorate and it may not be possible to play them back.
Also the recording information may not be displayed correctly.
•
Sound from motion pictures or pictures with audio recorded by this camera cannot be played
back by older models of Panasonic digital cameras (LUMIX) launched before July 2008.
•
In Motion picture mode, direction detection function cannot be used.
•
In the Motion picture mode, [AF MODE] is fixed to [
] and [STABILIZER] to [MODE1].
•
This unit does not support recording motion pictures on MultiMediaCards.
•
Compared to still pictures, motion pictures may have a narrow angle of view.
Item
Picture size
fps
Aspect ratio
¢
1280
k720 pixels
30
16:9
¢
848
k480 pixels
30
¢
640
k480 pixels
30
4:3
320
k240 pixels
30
•
Motion pictures can be recorded continuously up to 2 GB. The maximum available recording
time for up to 2 GB only is displayed on the screen.
DMC-FX48P_PC~VQT1X57_eng.book 60 ページ ２００８年１２月２６日 金曜日 午後６時２５分