Using the [rec] mode menu – Panasonic DMC-FX48 User Manual
Page 67
67
VQT1X57
Advanced (Recording pictures)
Using the [REC] Mode Menu
For details on [REC] mode menu settings, refer to P20.
Set the number of pixels. The higher the numbers of pixels, the finer the detail of the
pictures will appear even when they are printed onto large sheets.
Applicable modes:
ñ·¿
∫ When the aspect ratio is [X].
¢ This item cannot be set in the Intelligent auto mode.
∫ When the aspect ratio is [Y].
∫ When the aspect ratio is [W].
Note
•
“EZ” is an abbreviation of “Extended Optical Zoom”.
•
A digital picture is made of numerous dots called pixels. The
higher the numbers of pixels, the finer the picture will be
when it is printed on a large piece of paper or displayed on a
PC monitor.
A Many pixels (Fine)
B Few pixels (Rough)
¢ These pictures are examples to show the effect.
•
If you change the aspect ratio, set the picture size again.
•
The Extended Optical Zoom does not work when Macro Zoom is set or in [TRANSFORM],
[HIGH SENS.], [HI-SPEED BURST], [FLASH BURST], [PIN HOLE] and [FILM GRAIN] in
Scene mode so the picture size for [
] is not displayed.
•
Pictures may appear in mosaic depending on the subject and the recording conditions.
•
Refer to P120 for information about the number of recordable pictures.
@ [PICTURE SIZE]
(12M)
4000
k3000 pixels
(8M
)
¢
3264
k2448 pixels
(5M
)
2560
k1920 pixels
(3M
)
2048
k1536 pixels
(2M
)
¢
1600
k1200 pixels
(0.3M
)
¢
640
k480 pixels
(10.5M)
4000
k2672 pixels
(7M
)
¢
3264
k2176 pixels
(4.5M
)
¢
2560
k1712 pixels
(2.5M
)
¢
2048
k1360 pixels
(9M)
¢
4000
k2248 pixels
(6M
)
¢
3264
k1840 pixels
(3.5M
)
¢
2560
k1440 pixels
(2M
)
1920
k1080 pixels
DMC-FX48P_PC~VQT1X57_eng.book 67 ページ ２００８年１２月２６日 金曜日 午後６時２５分