Panasonic DMC-FX48 - Manual (Page 65)

65
VQT1X57
Advanced (Recording pictures)
∫ Canceling the travel date
The travel date is automatically canceled if the current date is after the return date. If you
want to cancel the travel date before the end of the vacation, select [OFF] on the screen
shown in step
3 or 7 and then press [MENU/SET] twice. If the [TRAVEL SETUP] is set to
[OFF] in step 3 , [LOCATION] will be also set to [OFF].
Note
• The travel date is calculated using the date in the clock setting and the departure date you set.
If you set [WORLD TIME] (P66) to the travel destination, the travel date is calculated using the
date in the clock setting and the travel destination setting.
• The travel date setting is memorized even if the camera is turned off.
• If [TRAVEL DATE] is set to [OFF], the number of days that have passed since the departure
date will not be recorded even if you set the travel date or the return date. Even if
[TRAVEL DATE] is set to [SET] after taking the pictures, the day of the vacation you took them
on is not displayed.
• If you set a departure date and then take a picture on a date before this departure date, [-]
(minus) is displayed in orange and the day of the vacation that you took the picture is not
recorded.
• If the travel date is displayed as [-] (minus) in white, there is a time difference that involves date
change between the [HOME] and [DESTINATION]. (It will be recorded)
• The text set as [LOCATION] can be edited later with [TITLE EDIT].
• The name for [FACE RECOG.] or [BABY1]/[BABY2] and [PET] in Scene mode will not be
recorded when [LOCATION] is set.
• [LOCATION] cannot be recorded when taking motion pictures.
• Intelligent auto mode cannot be set. Setting of other recording mode will be reflected.
Press 4 to select [LOCATION] and then press 1.
Press 4 to select [SET] and then press [MENU/
SET].
Enter the location.
• For details on how to enter characters, read the [TITLE EDIT] section on P86.
Press [MENU/SET] twice to close the menu.
Take a picture.
• The number of days that have passed since the departure date is displayed for about
5 seconds if this unit is turned on etc. after setting the travel date or when the travel date
is set.
• When the travel date is set, [—] appears on the lower right of the screen.
DMC-FX48P_PC~VQT1X57_eng.book 65 ページ ２００８年１２月２６日 金曜日 午後６時２５分