Panasonic DMC-FX48 - Manual (Page 68)

VQT1X57
68
Advanced (Recording pictures)
For details on [REC] mode menu settings, refer to P20.
Set the compression rate at which the pictures are to be stored.
Applicable modes:
·¿
Note
• Refer to P120 for information about the number of recordable pictures.
For details on [REC] mode menu settings, refer to P20.
This allows you to select the aspect ratio of the pictures to suit printing or the playback
method.
Applicable modes:
·¿
Note
• The ends of the recorded pictures may be cut at printing so check before printing. (P118)
For details on [REC] mode menu settings, refer to P20.
The camera automatically sets the optimum ISO sensitivity and shutter speed to suit the
movement of the subject and brightness of the scene to minimize the jitter of the subject.
Applicable modes:
·
[OFF]/[ ]/[ ]/[ ]
• The upper limit of the ISO sensitivity can be set.
• The higher the value set for the ISO sensitivity, the more the jitter is reduced but the greater the
amount of picture noise.
Note
• Depending on the brightness and how fast the subject is moving, jitter may not be avoided.
• Movements may not be detected when a moving subject is small, when a moving subject is at
the edge of the screen or when a subject has moved at the very moment when the shutter
button was pressed fully.
• To avoid picture noise, we recommend decreasing maximum ISO sensitivity level or setting
[COLOR MODE] to [NATURAL]. (P74)
A [QUALITY]
[A]: Fine (when giving priority to the picture quality)
[›]: Standard (when using the standard picture quality and increasing the number of
pictures to be recorded without changing the number of pixels)
? [ASPECT RATIO]
[X]: [ASPECT RATIO] of a 4:3 TV
[Y]: [ASPECT RATIO] of a 35 mm film camera
[W]: [ASPECT RATIO] of a high-definition TV, etc.
[X] [Y] [W]
[INTELLIGENT ISO]
ISOMAX
400
ISOMAX
8 00
ISOMAX
1600
DMC-FX48P_PC~VQT1X57_eng.book 68 ページ ２００８年１２月２６日 金曜日 午後６時２５分