Paxar 9840CL - Manual (Page 10)

6
••
Getting Started - 1 Paxar Systems Group Paxar 9840CL Printer
Setting Dip Switches
To change the DIP switch settings,
move the switches to the desired
position and then turn on the
printer. If you select Software
Controlled, the parameters in
Packet F will override the
communication settings. Software
Controlled uses the last sent Packet
F settings or the defaults. Turning
on the printer activates the DIP
switch settings. Make sure the DIP
switch settings match the printer's
setup for ribbon or supply type.
Upper DIP Switches
Lower DIP Switches