Paxar 9840CL - Manual (Page 41)

Paxar Systems Group Paxar 9840CL Printer Care and Maintenance - 4
••
37
Replacing the Fuse
The printer is shipped with a 115 volt or 220 volt slo-blow fuse.
To replace the fuse:
1. Disconnect the printer from the power source.
2. Use a screwdriver to pry open the fuse box in the back of the printer as shown.
3. Remove the old fuse and insert a new one.
4. Slide the fuse box back into the printer.
Fuse Box
Fuse