Paxar 9840CL - Manual (Page 13)

Paxar Systems Group Paxar 9840CL Printer Loading Supplies - 2
••
9
Loading Supplies - 2
This chapter describes how to load a roll of supply and a ribbon roll.
You can use Paxar's 9830CL fabric label kits containing perforated fabric labels and
ribbon. If you switch from black mark to continuous supplies make sure the DIP
switches are set correctly.
Make sure you use only approved Paxar supplies. See Appendix A, "Specifications
and Accessories" for a list of Paxar supplies or contact your Paxar Representative for
more information.
If you experience label jamming with narrow supplies in humid environments, store
supplies separately from the printer in a dry, less humid environment.
CAUTION
The width of the ribbon must be greater than the supply
width. Since some supplies are more abrasive to printheads
than others, using a ribbon wider than your supply helps
protect the printhead. Failure to do this may void your
prinhead warranty. Replacement printheads are expensive.