Using the knife – Paxar 9840CL User Manual
Page 29
Advertising
Paxar Systems Group Paxar 9840CL Printer
Printing - 3
••
25
Using the Knife
The installed knife is two and a half (2-1/2) inches away from the printhead. Pressing
and holding Feed for two seconds marks the tag under the printhead to be cut when it
reaches the knife. Depending on the length of your supply, you may lose up to two tags
after the last batch.
________
The knife operates when the printer is running. If the
Printer is paused, the knife stops cutting.
________
Advertising