Panasonic JOIP BB-GT1540E User Manual

Page 30

Advertising
background image

Preparation

30

For product assistance, visit www.globarange.com

For A assistance, visit www.joip.com

Configuring the Internet
connection settings

If your local network uses a DHCP
(Dynamic Host Configuration Protocol)
server for automatic IP address
assignments, you do not need to change
any settings. If your local network uses a
static IP address, turn the DHCP
connection mode off.
Leaving the DHCP connection mode on
allows the base unit to receive an IP
address automatically from a DHCP
server on your local network.

Automatic setup (default) N
The base unit automatically obtains an
IP address and other Internet connection
settings (subnet mask, default gateway,
and DNS server addresses).

Turning the DHCP connection mode
on:

1

K

i {#}{5}{0}{0}

2

{V}

/{^}: “On”

3

M

i {i}

L

Wait until the 4 indicator on the
base unit turns green. When the
4

indicator lights in green, the

setting is complete. Confirm your
A number (page 31).

L

When the 4 indicator on the
base unit does not light in green
even if you wait for a few minutes,
see page 24.

Note:
L

To view the Internet connection
settings:
K

i {#}{5}{0}{1} i When

finished, press {i}.

Static setup N
If your local network does not use a
DHCP server for automatic IP address
assignments, turn the DHCP connection
mode off first. Then set the static IP
address and other Internet connection
settings corresponding to your local
network.

Turning the DHCP connection mode
off:

1

K

i {#}{5}{0}{0}

2

{V}

/{^}: “Off”

3

M

i {i}

Setting the static IP address and
other settings:

1

K

i {#}{5}{0}{1}

2

Set the IP address and other
settings.
L

Push the joystick down {V} or up
{^}

to move between the

following 5 items.

IP
address

Enter the IP address in
this data field.

*1

L

Set 4 numbers (0-
255) separated by
periods such as
“192.168.0.253”.

Subnet
mask

Enter the subnet mask
in this data field.

*1

L

Set 4 numbers (0-
255) separated by
periods such as
“255.255.255.0”.

Default
gateway

Enter the default
gateway address in
this data field.

*1

L

Set 4 numbers (0-
255) separated by
periods such as
“192.168.0.1”.

GT15xxE.book Page 30 Wednesday, August 1, 2007 11:59 AM

Advertising