Panasonic JOIP BB-GT1540E - Manual (Page 34)

Making/Answering Calls (Handset)
34 For product assistance, visit www.globarange.com
For A assistance, visit www.joip.com
rapidly. After 1 additional minute on
hold, the call is disconnected.
L k If another phone is connected to
the same line (page 20), you can also
take the call by lifting its handset.
Mute button N
While mute is turned on, you can hear
the other party, but the other party
cannot hear you.
To mute your voice, press 1.
L
To return to the conversation, press
1
.
Note:
L
When this feature is turned on, 1
flashes.
{ 6} button N
k
Pressing {6} allows you to use special
features of your host PBX such as
transferring an extension call, or
accessing optional telephone services.
Note:
L
To change the recall time, see page
57.
l
Pressing {6} allows you to use optional
services from A. Visit www.joip.com
or contact the A service provider for
details.
Making another call on the IP line:
While you are talking with an outside
caller, you can make a 2nd call on the
same line by pressing {6} then dialling.
L
The 1st call is put on hold.
L To hang up the 2nd call, press {i}.
The alarm tone starts to sound. Press
{
IP} to talk with the 1st caller again. If
you do not press {IP}, the alarm tone
sounds for 1 minute and the 1st call is
disconnected.
You can combine the calls to make a
conference call by pressing {6} again
after the 2nd call is connected.
L
To hang up the 2nd call and talk with
the 1st caller, press {6}.
L
To hang up both lines, press {i}.
For Call Waiting service users
N
Call Waiting service is provided by your
landline service provider and A.
This feature allows you to receive calls
while you are already talking on the
phone. If you receive a call while on the
phone, you will hear a Call Waiting tone.
Press {6} to answer the 2nd call.
L
To switch between calls, press {6}.
Note:
L
k Please contact your landline
service provider for details.
L l Please visit www.joip.com or
contact the A service provider for
details.
Call share N
This feature allows you to join an
existing outside call.
When another unit is on an outside call,
press {TEL} or {IP} to select the line that
is being used for the call.
Note:
L
Multiple parties can join a conference
call. The possible number of
participating parties depends on the
current system usage. When another
participating party cannot join a
conversation, the busy tone sounds
and the handset displays “Busy”.
Call privacy N
Call privacy allows you to prevent other
users from joining your conversations
with outside callers. To allow other users
GT15xxE.book Page 34 Wednesday, August 1, 2007 11:59 AM