Panasonic KX-TD816NZ - Manual (Page 172)

5.2 Before Operating the DECT Portable Station
172
DECT Portable Station
To charge the battery
a) Connect the charger to a power outlet using the AC adaptor.
b) Slide the battery-attached portable station or the battery in the charger.
• Charge the battery for about 1.5 hours.
• When charging is completed, the charge indicator will change from orange to green.
To install a battery
Hook the bottom of the battery on the PS,
and place the battery until it clicks. To replace a battery
Set the power switch to OFF first to prevent
memory loss, and then remove the battery
while pressing the tab.
• The battery is used while the PS's power is ON.
• Battery life may vary depending on usage conditions and ambient temperature.
• Please use only a Panasonic battery.
• Do not let the charged battery's electrodes touch metallic objects. The terminal may short
and overheat, causing burns.
• Clean the charge contacts on both the PS and the charger with a soft cloth once a month,
or the battery may not charge properly.
• The PS can receive calls even while charging.
• You need not worry about overcharging.
• The AC adaptor is used as the main disconnect device. Ensure that the socket-outlet is
located near the equipment for easily access.
Charge indicator
Cord holder
AC adaptor
To power outlet
(220–240 VAC, 50 Hz)
Charger