Panasonic KX-TD816NZ User Manual

Page 215

Advertising
background image

6.1

Troubleshooting

Appendix

215

A reorder tone is audible or
"Restricted" is displayed.

The telephone is locked.

Unlock your telephone. (

2.5.3

Preventing Other

People from Using Your Telephone (Electronic Station
Lockout)
, 3.1.1

Changing the Settings)

Toll restriction is activated.

Consult your manager or dealer.

An account code is required. (

2.2.5

Calling

without Restrictions, 4.1.4

Charge Fee Management

[Pre-assigned extension only])

I cannot make an outside call using
the One-Touch Dialling button or
speed dialling.

A line access number was not stored.

A line access number is required for outside calls. (

2.2.1

Basic Calling, Refer to "Storing the names and

numbers for station speed dialling" in 2.9.4

Using the

KX-T7433, KX-T7436 or KX-T7235, 4.1.3

Customising

the Buttons)

I cannot remember the feature
numbers.

Ask your dealer to change the feature numbers for
easier use.

While talking to an outside party, the
line is disconnected.

The time limit has run out. (

2.4.3

Transferring a

Call 2.4.5

Three-party Conversation)

Consult your dealer to extend the time, if necessary.

Redialling does not function.

The stored number was more than 24 digits or an
extension number.
(

2.2.3

Redial)

I cannot access computer services,
banking-by-phone, etc.

A tone signal is required. (

2.2.5

Calling without

Restrictions)

The personal computer and facsimile
communication failed.

An indication tone may have interrupted
communication.
(

2.7.8

Protecting Your Line against

Indication Tones (Data Line Security))

I do not want to show my
identification number to the calling or
called party's telephone.

Consult your manager or dealer.

I want to show my identification
number to the calling or called party's
telephone.

(

2.7.4

Displaying Your Number on the Called Party

and Calling Party's Telephone (Calling / Connected Line
Identification Presentation [CLIP / COLP]))

I cannot send a call waiting tone to the
dialled extension.

The other party has not set the Call Waiting feature.
(

2.2.4

When the Dialled Line is Busy or There is No

Answer, 2.4.4

Answering a Call Waiting,

2.7.3

Receiving a Call Waiting (Call Waiting / Off-Hook

Call Announcement [OHCA] / Whisper OHCA))

The other party has set Data Line Security.

(

2.7.8

Protecting Your Line against Indication Tones

(Data Line Security))

I forgot the lock code / Live Call
Screening Password.

Ask the Operator to assist you.
(

3.1.1

Changing the Settings)

Problem

Remedy

Advertising
This manual is related to the following products: