2initial settings, Initial settings, 2 initial settings – Panasonic KX-TD816NZ User Manual
Page 141: Item selection programming input
4.1
Customising Your Phone (Station Programming)
Customising Your Phone & System
141
4.1.2
Initial Settings
The original settings are shown in bold letters in the shaded boxes. Find and mark your desired
selections for programming.
•
If nothing is entered within one minute in the programming mode, the mode returns to the
normal status.
•
To exit the mode at any time, lift the handset.
Pressing the One-Touch
Dialling button.
Which line do you prefer to
seize when you go off-hook
to make calls?
(Preferred Line Assignment
– Outgoing)
Item
Selection
Programming Input
No line
An idle outside line
A pre-assigned outside line
No line
Which line do you prefer to
seize when you go off-hook
to receive calls?
(Preferred Line Assignment
– Incoming)
A pre-assigned outside line
A ringing line
The Intercom line
Which way do you prefer to
dial the One-Touch Dialling
feature?
(Full One-Touch Dialling
Assignment)
Going Off-hook and then pressing
the One-Touch Dialling button.
(01–54)
Outside line no.
(01–54)
Outside line no.
9
9
OR
Press PROGRAM
or PAUSE.
Press PROGRAM
or PAUSE.
Press STORE.
Dial 99.
Follow programming
input.
To continue
To exit
To programme
To enter the programme mode
programming
input
PAUSE
PROGRAM
OR
PAUSE
PROGRAM
AUTO DIAL
STORE
INTERCOM
1
1
1
2
1
3
1
2
1
2
2
2
3
3
1
3
2