Panasonic KX-TD816NZ - Manual (Page 149)

4.2 Customising Your System (System Programming)
Customising Your Phone & System
149
Confirmation
To confirm your entry after storing data;
• The STORE button light: Lights red.
• Confirmation Tone:
— One beep: Your entry is accepted.
— Three beeps: Your entry is rejected.
Icon Descriptions
Icons are given to guide you through programming. The following is an example of how the icons may
be used:
Enter the programme number. (xxx= the specified number)
Press the corresponding button on the telephone or the Soft button which
corresponds to the display.
<Example>
: " NEXT " is displayed.
In this case, both of the following methods are available:
• Press the NEXT ( ) button.
• Press the Soft button which corresponds to " NEXT " shown on the display.
( )
The display messages " SEL+, SEL- and SEL " mean "SELECT."
" CLR " means "CLEAR."
Press the button until the desired entry appears.
Enter your selection.
<Example>
: " Jack no. " is displayed. Enter the jack number.
Press PROGRAM
or PAUSE. Press PROGRAM
or PAUSE.
After confirming If you do not know the jack number
9 6 9
Dial 996.
OR
PAUSE
PROGRAM
OR
PAUSE
PROGRAM END
Press END.
X X X
NEXT