Panasonic KX-TD816NZ - Manual (Page 150)

4.2 Customising Your System (System Programming)
150
Customising Your Phone & System
Procedure
The basic steps are shown below.
1. Entering the programming mode
2. Programming
• To delete or change an entry, press CLEAR (TRANSFER).
• To confirm your entry after storing data:
— The STORE button light: Lights red.
— Confirmation Tone:
One beep: Your entry is accepted.
Three beeps: Your entry is rejected.
• To exit the programming mode at any time, lift the handset.
Dial . Enter user password. Press PROGRAM
or PAUSE.
user password OR
PAUSE
PROGRAM
END NEXT STORE
SELECT
PREV
your entry programme no.
Enter programme
number (3 digits). Press NEXT. Enter your entry Press STORE. Press END.
Press SKP+. Press SKP-.
NEXT
SKP+ SKP–
Press SELECT.
Press NEXT. Press PREV.
OR
OR
To continue programming
To continue entering selections
To end
To go to the next/previous programme or entry.
To enter the desired programme or entry.