Panasonic KX-TD816NZ - Manual (Page 202)

5.4 Customising Your PS
202
DECT Portable Station
5.4.2 PS Programming
You may be required to enter a PS Programming password or a DECT System Lock password
when entering the PS Programming mode.
Depending on the password, the number of possible programming items changes for PS security
reasons. There are three password levels.
Level 0: A password is not required.
Level 1: A PS Programming password is required.
Level 2: A System Lock password is required.
After selecting the PS programming display, " ENTER PASSWORD " may be displayed.
If not displayed, no password is required.
The combinations of the passwords are as shown below.
If DECT System Lock password is:
If PS Programming password is:
System Lock password
PS Programming password
Level 0 – 2
are possible.
Level 0 – 2
are possible.
Not required. Not required.
Level 0 – 1
are possible.
Not required.
Level 0 – 2
are possible.
Not required.
ENABLE
ENABLE
ENABLE
DISABLE
DISABLE
ENABLE
DISABLE
DISABLE
No password
or
If incorrect password
Level 0 is
possible.
Level 0 – 1
are possible.
Level 0 is
possible.
Level 0 – 2
are possible.