Panasonic KX-TD816NZ - Manual (Page 218)

6.1 Troubleshooting
218
Appendix
Troubleshooting for DECT Portable Station
Problem Remedy
The PS does not work. • The battery is empty.
Charge the batteries fully. ( 5.2.1 Before Operating
the DECT Portable Station Battery Charge)
• The PS has been cancelled or the PS has not been
registered.
Consult your dealer.
The PS does not operate. • The power switch is OFF.
Turn it ON. ( 5.2.1 Before Operating the DECT
Portable Station Button Descriptions)
The PS does not ring. • Ringer volume is set to OFF or VIBRATION.
Set to ring by pressing the Volume Control button. (
5.2.1 Before Operating the DECT Portable Station
Button Descriptions)
• The PS is out of range or the Cell Station (CS) is busy.
Move closer to the CS or try again later.
• The radio channel is busy or a radio communication
error occurred.
Try again later.
You cannot dial. • The number which you dialled is restricted by the
system.
Consult your dealer.
• The key lock mode is set.
To cancel the mode, press the Function for about 2
seconds. ( 5.3.8 Locking the Keypads)
• The radio channel is busy or a radio communication
error occurred.
Try again later.
Static, sound cuts in/out, fades.
Interference from other electrical
units. Set the PS and CS away from other electrical
appliances.
Move closer to the CS.
"CS Busy" is displayed. • The radio channel is busy.
Try again later.
"FAULT" is displayed. Consult your dealer.