Panasonic KX-TD816NZ - Manual (Page 45)

2.2 Making Calls
Operation
45
To call an external party
To re-try
• If a call between two external parties is established, both parties will hear an alert tone
fifteen seconds before the time limit (Default: 10 min.) runs out. To extend the call duration
time, dial any key except " " while hearing an alert tone.
• If Built-in Automated Attendant service is set, you can access the desired extension
simply by pressing one digit number (0-9) according to the outgoing message.
• If the wrong DISA user code is entered three times, the call will be disconnected.
In Non Security Mode
Enter line
access
number
(9 or 81-88).
line access
no.
DISA user
code
Enter DISA
phone number.
DISA
phone no.
phone no.
In Trunk Security Mode
Enter phone
number of the
external party. Enter pre-assigned
DISA user code
(4-10 digits).
Any Telephone
R.B.Tone and
DISA outgoing
message One short
beep D.Tone from
Central Office
Enter line
access number
(9 or 81-88).
line access
no.
Enter DISA
phone number.
DISA
phone no.
phone no.
Enter phone
number of the
external party.
R.B.Tone and
DISA outgoing
message D.Tone from
Central Office
Enter desired number.
To dial a different number during a conversation with an outside party or
while hearing the ringback, reorder, or busy tone
Dial .
desired no.
Enter a line access number (9 or 81 to 88) as
the first digit when calling an external party.
PT / SLT
D.Tone