Panasonic 3000 - Manual (Page 14)

GETTING TO KNOW YOUR MACHINE
14
Setup as POP3 Client
To install the DP-2500/3000 as POP3 Client, the following network parameters need to be programmed on
your network.
• IP Address of the DNS Server (if not available, see Note 2)
• IP Address of the DP-2500/3000
• Subnet Mask of the DP-2500/3000
• Name or IP Address of the Default SMTP mail server
• IP Address of the Default Router
• POP Server Name or IP Address
• POP User Account Name
• POP Password
• Email Address of the DP-2500/3000 (see Note 1)
(see Note 1) (see Note 2)
Email transmission (from the DP-2500/3000 to a PC)
Email reception (from a PC to the DP-2500/3000)
NOTE
1. The email address format can be the same as your regular email address. If your email address is
[email protected], the DP-2500/3000’s email address can be [email protected].
2. By default the machine requires the IP Address of the DNS Server and prompts you to enter the SMTP and POP
Server Names. If the DNS Server is not available, change the Fax Parameter No. 161 (DNS SERVER) to
"1:Invalid". Then the machine will prompt you to enter the IP Address of the SMTP and POP Servers.
[email protected]
SMTP01.panasonic.com
(SMTP Mail Server)
POP02.panasonic.com
(POP Server)
(Router)
[email protected]
SMTP
POP3
[email protected]
SMTP01.panasonic.com
(SMTP Mail Server)
POP02.panasonic.com
(POP Server)
(Router)
[email protected]
SMTP
POP3
Pre Installation Information