Panasonic HYBRID IP-PBX KX-TDA30 - Manual (Page 27)

1.2 Making Calls
User Manual 27
To select an idle outside line in the specified outside line group automatically (Outside Line
Group Access)
To select the specified outside line
• Each of the S-CO button or G-CO button light shows the current status as follows:
Off: The line is idle.
Red on: The line is in use.
• You may be restricted from making a call to the specified outside party. To make a call, refer
to "1.2.7 Calling without Restrictions".
• To confirm number before dialling, you can enter a phone number and confirm it on the
display and then go off-hook. (Predialling)
• Call Charge Reference
You can confirm your total call charges by pressing the Charge Reference button.
• To make a call to another party without going on-hook, press the FLASH/RECALL button.
It will re-access the outside line and provide external dial tone. Pressing the Terminate button
will provide intercom dial tone. You can dial the new phone number without going on/off-hook.
• Hands-free Operation
You can make an outside call and have a conversation in hands-free mode using the SP-
PHONE button.
Customising Your Phone
• 3.1.2 Settings on the Programming Mode—Preferred Line Assignment—Outgoing
Select the seized line when going off-hook.
• 3.1.3 Customising the Buttons
Create or edit a Loop-CO (L-CO) button, a Group-CO (G-CO) button, a Single-CO (S-
CO) button, a Terminate button or a Charge Reference button.
PT and SLT PT/SLT/PS
Off-hook. Talk. Press G-CO or enter outside
line group access number
and then outside line group
number (2 digits).
Dial outside phone
number .
outside
phone no.
OR
(G-CO)
8
outside line
group no.
PT and PT/PS
Off-hook. Talk. Press S-CO .
(S-CO)
Dial outside phone
number .
outside
phone no.