Leaving voice messages, Pt/slt/ps – Panasonic HYBRID IP-PBX KX-TDA30 User Manual

Page 95

Advertising
background image

1.5 Before Leaving Your Desk

User Manual

95

Leaving Voice Messages

If the extension user you called is not able to answer your call, and your call is redirected to the message
box, you will hear the greeting message. Then, you can leave a voice message for that extension. It is also
possible to leave a voice message directly in the message box of a desired extension by following the steps
below:

To leave a voice message directly to another extension's message box

The default floating extension numbers are 591 for SVM card 1, and 592 for SVM card 2.

Voice message recording will stop, you will hear a notification tone, and the call will be
disconnected, in the following cases:

a.

the recording time for the voice message reaches the preprogrammed limit. (default: 120
seconds)

b.

the recording space for the SVM card reaches the limit.

When you are on the phone, you can transfer the call directly to the message box of a desired
extension by placing the call on hold temporarily, then pressing 38 + #6 + the desired
extension number. This allows the caller to leave a voice message in the message box of the
desired extension.

PT/SLT/PS

On-hook.

Off-hook.

Enter

38

.

Enter

#6

.

8

3

C.Tone

6

#

Dial

extension number

.

extension no.

You hear the
greeting message.

Record
message.

Advertising