Panasonic KX-HCM280A - Manual (Page 15)

Operating Instructions
[For assistance, please call: 1-800-272-7033] 15
1.2 Viewing Single Camera page
1. Access the camera (see page 11).
•
The Top page is displayed.
2. Click the [Single] tab at the top of the page.
•
When Security Warning window is displayed, click [Yes] (see page 16).
• See page 17 for Security Warning window when using Microsoft Windows
XP Service Pack 2.
3. Close the web browser.
Note
• Refresh interval is [Motion] by default. You can change it on the operation
bar (see page 21).
• Refresh interval may change depending on the network condition, PC
performance and what object you view. IPsec will also slow refresh
interval.
• When displaying video (Motion JPEG), the camera allows up to 30
simultaneous accesses. When trying more than 30 accesses, the 31st
user will see a gray screen. (Maximum 30 accesses for a Buffered Image
page too.)
• To reduce the data traffic, the video can be automatically changed to
refreshing still images on the General User page (see page 75).
• To display the Single Camera page directly, add it to the [Favorites] on the
web browser.
• When you view a dark image, enable the color night view mode on the
Camera Setup page (see page 65). The image will be brighter, but the
refresh interval may slow down and image quality may decrease in a dark
place.
Capture Image
Button
(see page 20)
Operation Bar
(see page 21)
Refresh Interval
(see page 21)
Click to
Center
(see page 19)
Camera Image
The banner is
displayed.
(see page 18)
Network Camera
Zoom
Focus
Program Preset
Scan
Pan / Tilt
640 X 480
320 X 240
∗
Resolution
STD - +
Brightness
Open
Short
Output
Refresh Interval
Image Quality
Favor Clarity
Favor Motion
Standard ∗
Motion
Please click here when gray color screen displayed
Running in IPv4 mode.
Alarm