Panasonic KX-HCM280A - Manual (Page 21)

Operating Instructions
[For assistance, please call: 1-800-272-7033] 21
1.2.3 Using Operation Bar
Note
When the camera image is not displayed correctly, click [Refresh] at the tool
bar on the web browser. The image will be refreshed.
(1) End Display and Preset Display: When the pan/tilt has
reached the end (Left End, Right End, Up End and Down
End), End Display appears. When the zoom or focus
operation has reached the end, Wide End, Tele End, Near
End, or Far End appears. When clicking a preset button, the
preset name appears.
(2) Pan Scan/Tilt Scan: Moves the lens throughout the
horizontal ( ) or vertical ( ) range, and returns to the
original position.
(3) Pan/Tilt/Home Position: Controls lens direction.
Pan ( : Left, : Right), Tilt ( : Up, : Down) and
Home Position ( : Center [Default])
(4) Zoom Buttons: Zooms in or out on the camera image.
(5) Focus Buttons: Used to adjust the focus.
(6) Preset Button: Applies the camera direction to a preset
position. You can preset 8 positions (see page 26—page 29).
(7) Alarm Position: When the External I/O detects a signal,
the camera can be set up to turn to this position. Only an
administrator can operate it (see page 26).
(8) Brightness: Changes brightness in 9 steps including
[STD] (Standard). Clicking [-] or [+] changes the image
brightness.
(9) Output Control: Controls the output signals of the
External I/O.
(10) Refresh Interval: Sets a refresh interval. (Motion—60-
second interval)
(11) Resolution: Selects [640 x 480] or [320 x 240] (default)
pixels.
(12) Image Quality: Selects the image quality.
•
[Favor Clarity] optimizes the image for good clarity.
• [Standard] keeps the standard quality. (default)
• [Favor Motion] optimizes the image for motion display.
Zoom
Focus
Program
Alarm
Preset
Scan
Pan / Tilt
640 X 480
320 X 240
∗
Resolution
STD - +
Brightness
Open
Short
Output
Refresh Interval
Image Quality
Favor Clarity
Favor Motion
Standard
∗
Left End
Motion
(1)
(2)
(4)
(8)
(9)
(10)
(11)
(12)
(5)
(6)
(7)
(3)