Panasonic KX-HCM280A - Manual (Page 59)

Operating Instructions
[For assistance, please call: 1-800-272-7033] 59
2.7 Using UPnP™ (Universal Plug and Play)
UPnP™ can automatically configure your router to be accessed from the Internet.
In order to use this feature, your router needs to support this feature and it must be
enabled. Most router manufacturers disable this feature as the default setting. See
http://panasonic.co.jp/pcc/products/en/netwkcam/ for details and see your
router manual for how to enable UPnP™. After the UPnP™ is enabled on the
router, set [Enable] for auto port forwarding.
Note
The camera's UPnP™ does not support IPv6. Use this feature in IPv4.
1. Click [UPnP] on the Setup page.
2. Set up UPnP™.
Setting Description
Auto Port
Forwarding • If the network setting is [Static] or [DHCP], enabling auto
port forwarding allows you to access the camera from the
Internet.
Note
If the network setting is [Automatic Setup], enable [Allow
Access from the Internet] on the Network page (see page
42).
Display Shortcut
Icon in My
Network Places • Enabling it displays a shortcut to the camera in the My
Network Places folder.
Note
If you use Windows XP or Windows Me, this feature is
available. Enable UPnP™ Windows component before
using this feature (see page 139).