Pentair INTELLIFLO VS-3050 - Manual (Page 9)

1
IntelliFlo VS-3050 Installation and User’s Guide
Section 1
Overview
IntelliFlo ® VS-3050 Variable Speed Pump
The IntelliFlo VS-3050 variable speed pump is well suited for all of your pool, spa, cleaner, waterfall and
other water application. Using the control panel, IntelliFlo can use one of the four selectable preset speeds
or the pump speed can be adjusted to run at a specific speed. IntelliFlo outperforms all conventional pumps
in its class. Advanced energy conservation features ensure that your filtration system is operating at peak
efficiency.
IntelliFlo VS-3050 models
The IntelliFlo VS-3050 operates at a maximum system flow of 160 gallons per minute (GPM)
The IntelliFlo VS-3050 can operate from 400 RPM to 3450 RPM with preset speeds of 750, 1500, 2350,
and 3110 RPM. The pump can be adjusted from the control panel to run at any speed between 400 RPM
to 3450 RPM for different applications. The IntelliFlo pump control panel alarm LED warns the user
against under and over voltage, high temperature, over current and freeze protection. See page 29 for the
LED alarm and warning sequence codes.
External Control
The IntelliFlo VS-3050 can communicate with an EasyTouch, IntelliTouch or SunTouch control system or
the IntelliComm communication center via a two-wire RS-485 connection for remote speed control. The
RS-485 communication cable is included with each pump. The EasyTouch and IntelliComm provide the
ability to remotely control the IntelliFlo with four preset speeds. The IntelliTouch can be configured to use
eight speeds with the IntelliFlo VS-3050.
IntelliFlo VS-3050 variable speed pump