Philips V200 - Manual (Page 254)

Chapter 13
13-90 Respironics V200 Ventilator Operator’s Manual REF 1057983 A
Options and Accessories
• Connect the sensors to the monitor, ventilator circuit, and patient
according to the Respiratory Monitoring section of the user’s
manual for your Respironics respiratory profile monitor.
7. Select the NICO-Esprit interface on the respiratory profile monitor.
• Press the MENU key to activate the SELECT A SCREEN menu.
Figure 13-45: Select A Screen Menu screen
• Turn the knob to highlight SETUP and then press the knob. The
SETUP screen appears.
• Turn the knob to highlight INPUT/OUTPUT and then press the
knob. The INPUT/OUTPUT screen appears.
Figure 13-46: Input/Output Setup Screen
• Turn the knob to highlight RS232-2 and then press the knob. The
RS232-2 screen appears
• Turn the knob to highlight ESPRIT and then press the knob. The
INPUT/OUTPUT screen appears.
Figure 13-47: ESPRIT Choice for RS232-2 Port Screen