Panasonic SC-AK58 - Manual (Page 12)

RQT5324
12
Turning the demo function off (DEMO)
If the clock has not been set, a demonstration of the display is shown
when the unit is off.
This function is set to on at the time of purchase.
To get the most from the eco mode (see below), turn the demo
function off.
Press and hold [-DISPLAY/ – DEMO] until
“NO DEMO” is displayed.
Every time you press and hold the button;
NO DEMO (off) DEMO (on)
ECO mode (MODE)
When this mode is used, the power consumed when the unit is
switched to standby mode reduces from a maximum of 18 W to 0.25 W.
This mode is set to on at the time of purchase.
To get the most from this mode, turn the demo function off or set the
clock.
Turning ECO on and off:
Press [ , POWER] to turn the unit on.
Press [MODE].
The display changes each time the button is pressed:
NORMAL (off)
ECO (on)
When ECO is on:
When the unit is turned off, the display panel remains blank but the
AC IN indicator stays to show the unit is still connected to the AC
power output.
Conserving power
The unit consumes 0.25 W even when it is turned off with [
,
POWER] or Auto-off function and ECO mode is turned on. To save
power when the unit is not to be used for a long time, unplug it from
the household AC outlet. Remember to reset the radio stations and
any other memory items before using the unit again.
Note
When the unit is off, the mode can be switched from NORMAL to
ECO, but not the other way.
DEMO
DISPLAY
POWER
MODE
Preparations
NORMAL
Clock display, etc.
18 W
ECO(on)
Blank
0.25 W
Display
Power consumption
in standby mode