Before recording (deck 2 only), Listening to tapes, Press [ ] or [ ] in the stop mode – Panasonic SC-AK58 User Manual

Page 22: Press [ ] or [ ] during play

Advertising
background image

RQT5324

22

To fast-forward or rewind the tape

Press [

] or [

] in the stop mode.

Before recording (Deck 2 only)

Types of tapes which can record correctly

The unit automatically identifies the type of tape.

Metal position tapes can be used, but the unit will not be able to
record or erase them correctly.

To record from the beginning of the tape

You cannot record on the leader part of the tape. Before recording,
wind the tape past the leader to a point where recording can start im-
mediately.

Recording part

Leader tape (no recording can be made)

Listening to tapes

TPS finds the beginning of a track and resumes play from there. Each
press increases the number of tracks skipped, up to a maximum of 9.

Press [

] or [

] during play.

Note

TPS searches for silent parts of about 4 seconds normally found be-
tween tunes. As a result, it may not function properly in the following
cases.
• With short silent parts
• When noise occurs between tunes
• With silent parts found within tunes

To find the beginning of a program
(TPS: Tape Program Sensor)

Tape direction

“ ”

“ ”

To rewind

[

]

[

]

To fast-forward

[

]

[

]

Tape direction

“ ”

“ ”

To play the current tune
from the beginning

[

]

[

]

To play the next tune
from the beginning

[

]

[

]

To start recording from a particular position on
the tape

Wind the tape on to the position you want recording to start from.

To start recording from the reverse side

Insert the cassette into deck 2 and follow these steps to change the
side.
1. Press [TAPE DECK 1/2] so the deck 2 indicator lights.
2. Press [

;

] then [ ]. Tape direction will be shown as “ ”.

How volume, sound quality/field affect
recording

The tape you are recording is not affected whatsoever by changes in
volume, sound quality/field.

To erase a recorded sound

1. Press [TAPE DECK 1/2].
2. Insert the recorded tape into deck 2.
3. Press [REV MODE] to select reverse mode.
4. Press [ REC/STOP].

Note

• You cannot open deck 1 while recording.
• You cannot fast-forward or rewind one deck while recording with the

other.

Tape deck operation

Recording operation

E

P

Y

T

/

N

O

I

T

I

S

O

P

L

A

M

R

O

N

I

E

P

Y

T

/

N

O

I

T

I

S

O

P

H

G

I

H

II

E

IV

P

Y

T

/

N

O

I

T

I

S

O

P

L

A

T

E

M

Advertising