Panasonic SC-AK58 - Manual (Page 16)

RQT5324
16
Listening to compact discs
Loading and checking CDs
Always stop the changer before loading or changing CDs. You can-
not change CDs while a disc is playing.
How to load CDs
1. Press the [ ] button.
The selected tray will open.
2. Set CD in the tray.
3. Press the same [ ] button.
The tray will close.
To continue loading CDs in the other trays
Press another [ ] button to open the required tray.
The current tray closes and the selected tray automatically opens.
Disc indicators (CD 1 – CD 5)
The disc indicators light whenever the tray is in the playing position,
whether it is loaded or not. (If the spectrum analyzer is off, the disc
indicators will not light up.
page 34).
To prevent damage
Always observe the following points.
•
Load only 1 CD per tray.
• Load CDs as shown in figure.
• An adapter is not needed with 8 cm CDs (singles).
• Set the system on a flat, level surface.
Do not set it on top of magazines, inclined surfaces, etc.
• Do not move the system while trays are opening/closing, or when loaded.
• Do not put anything except CDs in trays.
• Do not use cleaning CDs or CDs which are badly warped or cracked.
• Do not use CDs with poorly attached labels or stickers.
Adhesive protruding from underneath stickers or left over from
peeled off stickers can cause your stereo to malfunction.
• Do not use irregular shaped CDs.
1
2
3
8 cm CD
12 cm CD
1, 3
Label must face
upward.
Disc
indicators
CD operation