Panasonic SC-AK58 - Manual (Page 7)

RQT5324
7
1
2
3
4
5
LOO P
ANT
HOLD
ER
GND
FM ANT
( )
2
1
LOOP
EXT
AM ANT
(Right) (Left)
L
SUR
ROU
ND
(4-8
Ω )
R
CEN
TER
Antenna
holder
AM loop antenna
Red (+)
Black (–)
Blue (–)
Gray (+)
Adhesive tape
FM indoor
antenna
6
2
1
4
5
3
1. Connect the FM indoor antenna.
Tape the antenna to a wall or column, in a position where radio
signals are received with the least amount of interference.
Note
For best reception:
An FM outdoor antenna is recommended. (
page 8.)
2. Connect the AM loop antenna.
After attaching the antenna, turn on the system and tune in a
broadcast station. Then, turn the antenna to the angle of best re-
ception and least interference.
3. Connect the front speakers.
Connect each end of the speaker cables to the terminal levers of
the same color.
Use only the supplied front speakers.
The combination of the main unit and front speakers provide the
best sound. Using other front speakers can damage the unit and
sound quality will be negatively affected.
Caution
To prevent damage to circuitry, never short-circuit positive (+) and
negative (–) speaker wires.
4. Connect the center speaker.
5. Connect the surround speakers.
Note
If only one of the surround speakers is connected, no sound will
come out.
Be sure to connect both speakers.
6. Connect the AC power cord.
Connections
Basic connections
(for supplied accessories)
• Plug the AC power cord into a household AC outlet only after all other
connections have been made.
• To prepare the antenna wires and speaker cords, twist the vinyl cover
tip and pull off.
Before use