Panasonic CQ-C3305W - Manual (Page 26)

CQ-C5305W/C3305W 18 CQ-C5305W/C3305W 19
English
Hands-Free Phone System
Preparation
Hands-Free Phone System
Connecting Hands-Free Phone System
Connect the Hands-Free Phone System (CY-BT100N)
and establish the pairing. Refer to the instruction
manual for the Hands-Free Phone System for further
information.
Note: This unit is designed only for receiving calls. It
cannot send calls.
Audio Setting
Adjust the Ring Volume
Turn [VOL] clockwise or
counterclockwise to adjust
the ring volume when a call
is coming in.
: Up
: Down
Notes:
• The volume level adjusted here is linked to the talk
volume.
• Depending on the model of a cellular phone, the ring
tone comes from the main unit of the phone but
may be inaudible. In that case, the volume cannot be
adjusted during an incoming phone call.
Operation Flow
[Hang-up]/Red LED
Be sure to read “Safety Information” in the Operating Instructions for the Hands-Free Phone System before use.
Status indicator (Blue LED)
Lights: Call waiting/Talking
Stays out: Not connected
Blinks rapidly: Receiving a call
Blinks slowly:
Pairing/Reconnecting
Notes:
• Only outline is described here. Refer to the operating
instructions for the Hands-Free Phone System for further
information.
• We do not guarantee all the operations of connectable
devices.
Speaker Selection
(Setting range: LEFT, BOTH, RIGHT, default: BOTH)
SP LEFT: Sound from left speaker
SP BOTH: Sound from both speakers
(Default)
SP RIGHT: Sound from right speaker
Notes:
• The volume can also be adjusted directly using [VOL]
on the main unit. (  Operating Instructions)
• To return to the regular mode, press [DISP].
• If no operation takes place for more than 5 seconds
in audio setting (2 seconds in the volume adjustment)
the display returns to the regular mode.
1
Press [Hang-on] on the Hands-Free
Phone System and pick up the phone.
The phone is in the incoming state.
2
Adjust the volume if necessary.
3
Press [Hang-up] on the Hands-Free
Phone System and hung up the phone.
Notes:
• “CONNECT” is displayed when information of the
calling party cannot be acquired.
• To have another circle scroll while a telephone number
is displayed, press [3] (SCROLL). If the number of
displayed characters is 8 or less, the characters do not
scroll.
Bluetooth Hands-Free Kit Mode
This mode is not selectable by pressing [SOURCE],
but activated by receiving an incoming call. (To pick up
the phone, press [Hang-on] on the Bluetooth hands-
free kit.)
 “HANDS-FREE” is scrolled when a call is coming in.
The telephone number of the calling party is
displayed.
Operation Flow (continued)
Reject Calls
Pressing [Hang-up] allows users to reject a call when
the call is coming in.
Bluetooth Disconnection/Reconnection
Pressing [Hang-up] allows users to temporarily
disconnect when the phone is in the waiting state.
Pressing [Hang-on] allows users to reconnect when
the Bluetooth unit is temporarily disconnected.
1
Press [VOL] (PUSH SEL:
Select ) to open the menu.
2
Press [VOL] (PUSH SEL:
Select ) to select a mode
to be adjusted.
3
Turn [VOL] clockwise
or counterclockwise to
adjust.
Volume Adjustment
(Setting range: 0 to 40, Default: 18)
\CQ-C5305W]
: Up
: Down
[CQ-C3305W]
: Up
: Down
Switch Unit
[Hang-on]/Blue LED