Panasonic DMC-LZ8 User Manual

Page 45

Advertising
background image

45

VQT1L86

Advanced-Shooting

The available fl ash range to take
pictures in Intelligent ISO are as
follows:

ISO LIMIT

Available fl ash range

ISO MAX400 60 cm (1.97 feet) to

4.3 m (14.11 feet) (Wide)

1.0 m (3.28 feet) to

2.4 m (7.88 feet) (Tele)

ISO MAX800 80 cm (2.62 feet) to

6.0 m (19.69 feet) (Wide)

1.0 m (3.28 feet) to

3.4 m (11.16 feet) (Tele)

ISO MAX
1600

1.15 m (3.77 feet) to

8.6 m (28.22 feet) (Wide)

1.0 m (3.28 feet) to

4.8 m (15.75 feet) (Tele)

Shutter speed for each fl ash mode

Flash mode

Shutter speed (sec.)

:

AUTO

1/30 to 1/2000

: AUTO/

Red-eye

reduction

1/30 to 1/2000

:

Forced

FLASH ON

:

Forced

ON/Red-eye

reduction

1/30 to 1/2000

: Slow sync./

Red-eye

reduction

1/8 or

1 to 1/2000*

1

1/8 to 1/2000*

2

:

Forced

FLASH OFF

1/8 to 1/2000

1/8 or 1 to 1/2000*

1

1/4 or 1 to 1/2000*

3

*

1

[NIGHT PORTRAIT] or [CANDLE

LIGHT] mode

*

2

[PARTY] mode

*

3

Intelligent ISO/ [SPORTS], [NIGHT

PORTRAIT], [CANDLE LIGHT], [BABY],

and [PET] mode

The shutter speed reaches the maximum

of 1 second for *1 and *3 when:

Optical Image Stabilizer is [OFF]

In intelligent auto mode [

] or when

the Optical Image Stabilizer is set to

[MODE1] or [MODE2] and the camera

determines that there is minimum

possibility of blurring.

Refer to

P

50

for details in aparture-priority

AE, shutter-priority AE and manual exposure.

The shutter speed will be different from

that shown in the table in the following

scene modes.

[NIGHT SCENERY]:

8 seconds or 1/8th of a second to

1/2000th of a second

[STARRY SKY]:

15 seconds, 30 seconds, 60 seconds

[FIREWORKS]:

1/4th of a second, 2 seconds

In program AE mode [ ], the highest

shutter speed value varies depending on

the setting in [MIN. SHTR SPEED].

Do not look directly at the fl ash at

close range when it is activated.

Do not bring the fl ash too close to

objects or close the fl ash while it

is activated. The objects may be

discolored by its heat or lighting.

While the fl ash is charged, the LCD

monitor turns off and you cannot take

pictures. The status indicator lights up.

If the remaining battery power is low,

the screen may be turned off for a

longer period of time.

When you take a picture beyond the

available fl ash range, the exposure may

not be adjusted properly and the picture

may become bright or dark.

When the fl ash icon blinks, the fl ash is

being charged and you cannot take a

picture even when you press the shutter

button fully.

The white balance may not be properly

adjusted if the photo fl ash is insuffi cient.

When the shutter speed is fast, the fl ash

effect may not be suffi cient.

When you repeat taking a picture,

recording may be disabled even if the

fl ash is activated. Take a picture after the

access indication disappears.

The red-eye reduction effect differs

between people. Also, if the subject was far

away from the camera or was not looking at

the fi rst fl ash, the effect may not be evident.

In burst mode or auto bracket mode, you

cannot use the fl ash.

Advertising
This manual is related to the following products: