Panasonic DMC-LZ8 - Manual (Page 51)

51
VQT1L86
Advanced-Shooting
To change mode
Press [MENU/SET], select mode with e /r
and press [MENU/SET] again.
You can move to the recording menu or
SETUP menu. Select [A/S/M] icon with w
and select [
] (Recording menu) or [ ]
(SETUP menu) with r.
Aperture-priority AE setting value
Aperture value
setting (with 1/3 EV
step)
Shutter speed
setting (sec.)
F3.5, F3.3 8 to 1/1000
F5.0, F4.5, F4.0 8 to 1/1300
F7.1, F6.3, F5.6 8 to 1/1600
F8.0 8 to 1/2000
Shutter-priority AE setting value
Shutter speed
setting value (sec.)
(with 1/3 EV step)
Aperture value
setting
8, 6, 5, 4, 3.2, 2.5,
2, 1.6, 1.3, 1, 1/1.3,
1/1.6, 1/2, 1/2.5,
1/3.2, 1/4, 1/5, 1/6,
1/8, 1/10, 1/13, 1/15,
1/20, 1/25, 1/30,
1/40, 1/50, 1/60,
1/80, 1/100, 1/125,
1/160, 1/200, 1/250,
1/320, 1/400, 1/500,
1/640, 1/800, 1/1000
F3.3 to F8.0
1/1300 F4.0 to F8.0
1/1600 F5.6 to F8.0
1/2000 F8.0
Manual exposure setting value
Aperture value
setting (with 1/3 EV
step)
Shutter speed
setting (sec.) (with
1/3 EV step)
F3.3 to F3.5 60 to 1/1000
F4.0 to F5.0 60 to 1/1300
F5.6 to F7.1 60 to 1/1600
F8.0 60 to 1/2000
■
■
■
■
Each setting value is the one shown at
the end of Zoom W. Depending on the
zoom position, some values cannot be
selected.
The LCD brightness may differ from
the brightness for actual pictures taken.
Playback and confi rm.
If optimum exposure cannot be achieved,
the aperture value and shutter speed
value turn to red.
Using tripod is recommended when the
shutter speed is slow.
When shutter-priority AE is set, you
cannot make the following settings.
Flash: Slow sync./Red-eye reduction
Intelligent ISO
When manual exposure is set, you
cannot make the following settings.
Flash: Slow sync./Red-eye reduction
Intelligent ISO
Compensating exposure
( P48 )
If you set the ISO sensitivity to [AUTO]
while manual exposure mode, the
camera automatically selects [ISO100].
•
•
•
•
•
–
–
•
–
–
–
•