Panasonic DMC-LZ8 - Manual (Page 88)

88
VQT1L86
Advanced-Viewing
Delete the title (for [SINGLE] only)
In step
2 when [SINGLE] is selected,
delete all the texts, select [EXIT], and
press [MENU/SET].
Press [ ] twice to close the menu.
Registered text can be displayed on the
screen of this unit. (Displayed on slide if
too many texts are input.)
The name setting of [BABY] or [PET]
mode can be registered by using the
same operation as “Single setting”.
However, the name setting and [TITLE
EDIT] cannot be registered at the same
time.
You can use the software
[PHOTOfunSTUDIO-viewer-] on the
CD-ROM (supplied) to print the text
(comments). For details, refer to the
operating instructions (PDF fi le) of the
software.
Example of text entry
In case of entering [LUMIX]:
1
Move e/r/w/q to move the cursor to
[L] and then press [MENU/SET].
2 Move e/r/w/q to move the cursor to
[U] and then press [MENU/SET].
3 Move e/r/w/q to move the cursor to
[M] and then press [MENU/SET].
4 Move e/r/w/q to move the cursor to
[I] and then press [MENU/SET].
5 Move e/r/w/q to move the cursor to
[X] and then press [MENU/SET].
■
1.
2.
•
•
•
[ TEXT STAMP]
Stamping the text on your
pictures
You can stamp the set text, date and time
of recording, the age and the travel date on
the recorded pictures.
This function is suitable when you print
4˝ Ч 6˝/10 Ч 15 cm images. (Images are
resized when you add the text to the
pictures taken with a resolution of more
than [
].)
Select [ TEXT STAMP] from
playback menu ( P86 ) .
Common operation
Press e/r to select [SINGLE] or
[MULTI] and press [MENU/SET].
MENU
SET
CAL
PLAYBACK
CALENDAR
TITLE EDIT
TEXT STAMP
RESIZE
TRIMMING
SELECT SET
SINGLE
MULTI
You cannot add the texts or the date to
the following images.
Images taken when the clock is not set
Images that already have texts on them
Motion pictures
Images recorded with other equipment
Single setting
After the common operation
Press w / q to choose a picture,
then press [MENU/SET].
MENU
SET
100-0001 100-0001
1/19 1/19
10 M TEXT TEXT
STAMP STAMP
CANCEL CANCEL A A SELECT SELECT SET SET
■
•
–
–
–
–
■
1
Press [ ] to display the [PLAYBACK] mode menu and select the item to set. ( P86 )