Panasonic DMC-LZ8 - Manual (Page 75)

75
VQT1L86
Advanced-Shooting
[ BURST]
Shooting in quick succession
When you press and hold the shutter
button several pictures are taken in
succession.
Burst mode
Burst speed 2.5 fps*
Approx. 2 fps
Number of
recordable
pictures
G
Max. 3
(DMC-LZ10)/
Max. 4
(DMC-LZ8)
Depending on
the remaining
capacity of
the built-in
memory / card.
H
Max. 5
(DMC-LZ10)/
Max. 7
(DMC-LZ8)
* The burst speed is constant regardless of
the transfer speed of the card.
The focus is fi xed when the fi rst picture
is taken. The exposure and the white
balance vary depending on the burst
mode setting. (When burst mode is set to
[
], they are fi xed to the values set for
the fi rst picture and when the burst speed
is set to [
], they are adjusted each
time you take a picture.)
When the self-timer is used, the number
of recordable pictures in burst mode is
fi xed to 3.
In burst mode, the fl ash setting is fi xed to
Forced FLASH OFF [ ].
Burst mode is not canceled even when
the camera is turned off.
When the burst mode setting is set to
[
], the burst speed becomes slower
halfway. (The exact timing of this depends
on the type of card and each settings.)
The burst speed may become slower if the
ISO sensitivity is set to high or in dark places.
•
•
•
•
•
•
If you are following a moving subject while
taking pictures in a place where there is
a large difference between the light and
shade, the exposure may not become
optimal.
If you take pictures in burst mode with
the built-in memory, it will take time to
write the picture data.
In burst mode, auto review is activated
even if the setting is off.
Burst mode cannot be set in [STARRY
SKY] and [HI-SPEED BURST] modes.
Auto bracket mode setting is canceled
when [BURST] is activated.
T
[COLOR EFFECT]
Setting color effects for the
recorded pictures
You can use following types of color effects
depending on the image of the picture.
Item Setting
OFF Standard setting
B/W Black and white
SEPIA Sepia colored pictures
COOL More blue
WARM More red
Noise may become noticeable when
taking pictures in dark places. If it bothers
you, we recommend setting [COLOR
EFFECT] to [OFF].
When in intelligent auto mode [
],
[COOL] and [WARM] cannot be set.
When in intelligent auto mode [
], it is
set independently from other modes.
•
•
•
•
•
•
•
•
Press [ ] to display the [REC] mode menu and select the item to set. ( P19 )