Planet Technology FGSW-2620VM - Manual (Page 19)

FGSW-2620VM User’s Manual
Default is “300” seconds.
Hash Algorithm Provide MAC address table Hashing setting on Switch; available options are
CRC Hash and Direct Map.
Default mode is CRC-Hash.
Save button Press the button to complete the configuration.
4.1.2 IP Configuration
User can configure the IP Settings and DHCP client function, the screen in Figure 4-1-3 appears.
Figure 4-1-3 IP configuration screenshot
OObject Description
DHCP Client "Enable" is to get IP from DHCP server. "Disable" is opposite. The DHCP client
function only works if you haven't assigned a static IP address that different
than the switch default IP. Once the default IP has been changed the DHCP
will not effective and the switch will continue using the manually entered static
IP. If you have changed the switch to a static IP address, you can set the IP
address back to its default IP address or you can reset the switch back to
factory default. And then you can enable the DHCP client function to work.
IP Address Assign the switch IP address.
The default IP is 192.168.0.100.
Subnet Mask Assign the switch IP subnet mask.
Gateway Assign the switch gateway.
The default value is 0.0.0.0.
Apply button Press the button to complete the configuration.
19