Planet Technology FGSW-2620VM User Manual
Page 31
FGSW-2620VM User’s Manual
Figure 4-2-8
Trunking – State Activity interface
OObject
Description
Active
The port automatically sends LACP protocol packets.
Passive
The port does not automatically send LACP protocol packets, and responds only if
it receives LACP protocol packets from the opposite device.
Apply button
Press the button to change the port state activity. Opposite is Passive.
"
Note
:
1.
A link having either two active LACP ports or one active port can perform dynamic LACP trunking.
2.
A link has two passive LACP ports will not perform dynamic LACP trunking because both ports are waiting
for and LACP protocol packet from the opposite device.
3.
If you are active LACP's actor, when you are select trunking port, the active status will be created
automatically.
31