Planet Technology FGSW-2620VM - Manual (Page 30)

FGSW-2620VM User’s Manual
Activity page.
Work Ports Allow max four ports can be aggregated at the same time. If LACP static trunk group, the
exceed ports are standby and able to aggregate if work ports fail. If it is local static trunk
group, the number must be as same as the group member ports.
Choose Port Select the ports to join the trunk group. Allow max four ports can be aggregated at the
same time.
Add button Press the button to add the port.
Remove button Press the button to remove unwanted ports.
Apply button Press the button to save the configuerations.
Delete button Press the button to delete Trunk Group and the Group ID.
4.2.5.2 Aggregator Information
When you had setup the LACP aggregator, you will see relation information in here.
Figure 4-2-7 Trunking - Aggregator Information interface
OObject Description
Group Key Indicates the Static Trunking Groupd ID.
Port Member Indicates the selected ports that joined the Trunk group.
4.2.5.3 Aggregator State Activity
When you had setup the LACP aggregator, you can configure port state activity. You can mark or un-mark the port.
30