General, General operations, Power on/off – Panasonic C1305L User Manual

Page 12: Source selection, Volume adjustment, Mute, Sq (sound quality), Caution

Advertising
background image

General

[VOL] (Volume)

[SOURCE] (Source)
selects a source.
[PWR] (Power)
toggles power on/off.

Power On/Off

Set your car’s ignition switch to the ACC or ON position.

Power on: Press [SOURCE] (PWR).
Power off: Hold down [SOURCE] (PWR) for

more than 1 second.

Source Selection

Press [SOURCE] to change the source.

Radio

Disc Player

AUX IN

Volume Adjustment

(Setting Range: 0 to 40, Default: 18)
Turn [VOL].

Mute

ON: Press [MUTE]. (

lights.)

OFF: Press [MUTE] again.

SQ (Sound Quality)

SQ is a function that can call up various sound types at the
touch of button in accordance with your listening music type.

Press [SQ] to select the sound type (SQ) as
follows:

(FLAT) fl at frequency response:
does not emphasize any part.
(Default)

(ROCK) speedy and heavy
sound:
exaggerates bass and treble.

(POP) wide-ranged and deep
sound:
slightly emphasizes bass and
treble.

(VOCAL) clear sound:
emphasizes middle tone and
slightly emphasizes treble.

Notes:

•

If no operation takes place for more than 5 seconds in the
SQ selection mode, the display returns to the regular mode.

•

Settings of SQ, bass and treble are infl uenced one another.
If such an infl uence causes distortion to the audio signal,
readjust bass/treble or volume.

•

For further information on Bass, Treble, Balance and Fader
settings, refer to Audio Settings.

General Operations

[MUTE]
toggles mute on/off.

*[AUX] (AUX IN) (3.5 mm

 stereo)

From line output of external sound/audio
device (ex. Silicon-audio player, HDD
player, etc.)

Remote Control Sensor

*

Caution

• Set the volume level to low

enough before the AUX
connection is completed.

Failure to observe this, the

loud noise may come out and
damage your speakers and your

hearing.

*AUX IN:

[SQ] (Sound Quality)
selects a sound type
(SQ).

Advertising
This manual is related to the following products: