Philips 32PT7005D - Manual (Page 11)

11 11
HOW TO USE THE TUNER MODE CONTROL
T he TUNER MODE control lets you change the TV input signal to ANTENNA or CABLE mode. It is important
that you know which type of signal to look for (Cable or Antenna).
1 Press MENU button on the remote control to
display the onscreen menu.
2 Press CURSOR < or > to scroll through
the onscreen menu until you see Install
highlighted.
3 Press CURSOR > to display the Install menu
features.
4 Press CURSOR < or > to scroll through the
Install features until you see Tuner Mode
highlighted.
5 Press CURSOR > to select Antenna or Cable.
6 When finished, press MENU button on the
remote control twice to exit the menu from
the
TV screen.
Digital Mode Analog Mode Follow these steps for Digital Mode and Analog Mode
DTV Setup
Language
Tuner Mode
Auto Install
Language
Tuner Mode
Auto Install
Install
Language
Tuner Mode
Auto Install
Channel Edit
Language
Tuner Mode
Auto Install
Channel Edit
Install
1 2 3
4 5 6
7 8 9
0
VOL CH
MENU OK
MUTE
AUTO
PICTURE
AUTO
SOUND A/D
FORMAT CLOCK SLEEP GUIDE
POWER
AV SAP
A/CH
CC INFO
MENU
>
>
< >
When CABLE is selected, channels 1-135 are
available in Digital Mode and Channels 1-125 are
available in Analog Mode.
When ANTENNA is selected, channels 2-69 are
available for both Digital and Analog Modes.
When you install in either Digital or Analog
mode, both Digital and Analog channels will be
installed.
Press A/D button on the remote control to toggle between
Digital and Analog Mode.
H
ELPFUL
H
INTS
A/D
toggles between
digital and analog
mode