How to use the timer menu controls, Digital mode analog mode – Philips 32PT7005D User Manual
Page 26
HOW TO USE THE TIMER MENU CONTROLS
26
1
Press the MENU button on the remote
control to display the onscreen menu.
2
Press the CURSOR < or > button until
Features is highlighted.
3
Press the CURSOR > button to
display the Features menu.
4
Press the CURSOR > button to
display the Timer menu.
5
-
Press the CURSOR > button to
access the Timer menu.
6
Press the CURSOR < or >¸
until one of the Timer controls (Time,
Start Time, Stop Time, Channel, Activate, or
Displayhighlight) is hightlighted.
7
Press the CURSOR > to display the menu
for the selected item. Make adjustments to
the selected items by following the steps
below.
Time: Enter the current time using the
NUMERIC buttons. Use the CURSOR
> or < to toggle the AM and PM setting.
Start Time: Use the NUMERIC buttons to
enter the time you want the TV to turn
itself On. Use the CURSOR > or < to
toggle the AM and PM setting.
Stop Time: Use the NUMERIC buttons to
enter the time you want the TV to turn itself
Off. Use the CURSOR > or < to toggle the
AM and PM setting.
Channel: In Digital Mode, use CH +
or CH- to select DTV which is the last
viewed digital channel. In Analog Mode,
use the NUMERIC buttons or the CH + or
CH- buttons to enter the startup channel.
Activate: Set the timer to turn itself Off,
Once or Daily. Press the CURSOR > or <
to select Once, Daily, or Off.
Display: Press the CURSOR > or <
to toggle between On or Off. If On is
selected, the time will be displayed all the
time when the TV is on. When Off is
selected, the time will only appear
when the INFO button is pressed.
NOTE : Display is not available in Digital
Mode.
8
Press the MENU button on the remote
control three times to remove the onscreen
menu from the TV screen.
Y
our television comes with an onscreen clock. The TV can also be set to turn on or off at a specific time and tune
to a specific channel when it powers itself on.
In Digital Mode : Before you turn off the TV you have to switch to
the desired digital channel because the TV will wake up in the last
viewed digital channel.
In Analog Mode : You can specify which channel to wake up to.
Press A/D button on the remote control to toggle between Digital and
Analog Mode.
H
ELPFUL
H
INTS
Digital Mode
Analog Mode
1
2
3
4
5
6
7
8
9
0
VOL
CH
MENU
OK
MUTE
AUTO
PICTURE
AUTO
SOUND
A/D
FORMAT CLOCK SLEEP
GUIDE
POWER
AV
SAP
A/CH
CC
INFO
DTV Setup
Timer
AutoLock
Timer
Rotation
AutoLock
Auto Control
Timer
Rotation
AutoLock
Features
Timer
Rotation
AutoLock
AutoControl
Features
DTV
>
>
<
>
MENU
NUMERIC
A/D
toggles between
digital and analog
mode