Pitney Bowes W680 - Manual (Page 101)

Appendix A • Control Panel Menus
Pitney Bowes W660/W680 Operator Guide A-19
To use this option to direct the printer to Load or Save the Job
Setting as a certain number:
1. Press the + or – buttons to scroll through the Main
Menu options until the 7. JOB SETTINGS option
appears on the LCD panel.
2. Press the Enter button to select this option.
3. Press the + or – buttons to select A. Load or B. Save.
4. Press the Enter button to select the desired option.
5. After making your selection, press the Menu button
several times to back out of the Menu, until the
printer displays OFF LINE. Then, press the On Line
button to enable the printer.
NOTE: If your printer is attached to a computer, use this
menu to configure your printer so it is compatible with
your computer’s setup.
7. Job Settings
(continued)