Pitney Bowes W680 - Manual (Page 33)

Pitney Bowes W660/W680 Operator Guide 3-5
W660/W680 Basics • 3
Setting Up A
Job (continued)
8. Feed Fence
Helps confine the stack. Adjust to the width of your material plus
1/16" clearance.
9. Control Panel
Use the control panel buttons to access printer menus, define
print options, run the print job, position the print carriage and
turn the printer on and off line. See Appendix A, Printer Menus,
5. Feed Ramp and Lock Knob
The feed ramp adds a gentle slope to the stack to help feeding.
Lower the feed ramp until the top of the bottom piece in the
stack reaches the middle of the feed ram. Secure the feed ramp
with the lock knob.
6. Wireframe Slide
Slides the wireframe side to side. Lock in position with the lock
lever (Item 7).
7. Wireframe Slide Lock Lever (Not Shown)
Locks the wireframe slide in position.
1 2 4
5
6
7
8
11
10
13 12
9
3