Pitney Bowes W680 - Manual (Page 24)

2-12 Pitney Bowes W660/W680 Operator Guide
2 • Setting Up the W660/W680 Printer
1. Connect the female end of the power cord to the power
receptacle in the interface panel. Refer to the figure on
page 2-10.
2. Plug the male end of the power cord into a grounded
outlet. Please review the safety information on pages
2-9 and 2-10.
Once you've connected the cable, press the printer’s power switch
to the “|” (ON) position. The switch is located next to the power
cord receptacle.
When you turn the printer on:
• The LCD menu shows the "STARTUP" and "INITIALIZ-
ING" screens.
• After the print head carriage moves to the right and
parks in the maintenance station, the LCD shows the
"ON LINE" screen.
5. Connect the Power Cord Connecting to
Power
Turning On the
W660/W680