Philips HTS7500 - Manual (Page 18)

18
Connect power cord
Warning
Risk of product damage! Ensure that the •
power supply voltage corresponds to the
voltage printed on the back or the underside
of the product.
Before any connection to power outlet, set the
•
voltage selector (at the rear or bottom of this
product) to the local power line voltage.
1
Connect the power cord to the power
outlet when all the required connections
are done.
This product is ready to be set up for
»
use.
Connect LAN
Connect this Home Theater System to the
network for software updates and enjoy BD-
Live applications.
1
Connect the network cable (not
supplied) to the LAN jack on this Home
Theater System and the LAN jack on the
broadband modem or router.
Note
Use an RJ45 straight cable. Do not use a •
crossover cable.
Internet access to Philips website for software
•
update may not be allowed, depending on
the router you use or the Internet Service
Provider’s policy. Contact your Internet
Service Provider for more information.
LAN
BROADBAND
EN