Philips HTS7500 - Manual (Page 22)

22
7
Select the connector that is used for the
device, then press OK .
Repeat steps 6~7 to map other
»
devices.
8
Press to exit the menu.
Update audio mapping from
connected devices
If you have already mapped audio from
connected devices, you can use this procedure
to update your mapping.
1
Press , select [Settings] , then press OK .
2
Select [EasyLink Setup] > [Audio Input
Mapping] , then press OK .
3
Select a connected device then press .
4
Select the connector that is used for the
device then press OK .
5
Repeat steps 4~5 to map other
connected devices.
Map the devices to the audio inputs
Note
Before you start, ensure that the audio output •
of the HDMI TV and other HDMI devices have
been connected to the audio input jacks on
this Home Theater System.
1
Press , select [Settings] , then press OK .
2
Select [EasyLink Setup] , then press .
• [One Touch Play] and [One Touch
Standby] functions are turned on by
default.
3
Select [System Audio Control] > [On] .
4
Read the on-screen instructions and
press OK to select [Continue] .
The Home Theater System scans and
»
displays the valid devices.
5
Press OK to select [Continue] .
6
Select a connected device on the left of
the menu, then press .
Video Setup
Advanced Setup
Audio Setup
Preference Setup
EasyLink Setup
One Touch Play
EasyLink
One Touch Standby
On
On
System Audio Control Off
Audio Input Mapping
On
Aux2
Aux1
Coaxial
Optical
Philips TV
DVD player
Recorder
EN