Philips HTS7500 - Manual (Page 37)

37
[System Audio Control]
When you play a device which its audio
output is routed to this Home Theater
System, this Home Theater System
switches to the corresponding audio source
automatically.
• [On] - Enables system audio control
feature. Then proceed to [Audio Input
Mapping] to scan and map all the
connected devices.
• [Off] - Disables system audio control
feature.
[Audio Input Mapping]
Maps the connection between other devices
and the audio input jacks of this Home
Theater System. Only the detected devices
will be displayed for mapping.
Note
You need to enable the • [System Audio
Control] before you can map the audio input.
Advanced Setup
1
Press .
2
Select [Settings] , then press OK .
3
Select [Advanced Setup] , then press .
4
Select an option, then press OK .
Video Setup
Advanced Setup
BD Live Security
Network
Software Download
Clear Local Storage
DivX® VOD Code
Version Info.
Restore Factory Settings
Audio Setup
Preference Setup
EasyLink Setup
Off
To exit the menu, press • .
Note
See the explanations of the above options in •
the following pages.
[EasyLink]
Your product supports Philips Easylink, which
uses the HDMI CEC (Consumer Electronics
Control) protocol. EasyLink-compliant devices
that are connected through HDMI connectors
can be controlled by a single remote control.
• [On] - Enables EasyLink features.
• [Off] - Disables EasyLink features.
[One Touch Play]
When you press PLAY on the remote control,
the TV (if supports one-touch play) and the
Home Theater System will be turned on.
Disc play starts if there is a disc in the Home
Theater System and the TV automatically
switches to the correct channel to show the
video content.
• [On] - Enables one-touch play feature.
• [Off] - Disables one-touch play feature.
[One Touch Standby]
When you press and hold ( Standby ) on the
remote control, this Home Theater System
and all the connected HDMI CEC devices
(if supports one-touch standby) switch to
standby mode simultaneously.
• [On] - Enables one-touch standby
feature.
• [Off] - Disables one-touch standby
feature.
Note
When • [Off] is selected, the Home Theater
System cannot be switched to standby by a
remote control from the TV or other devices.
EN