Philips HTS7500 - Manual (Page 35)

35
Tip
The test tone is emitted from the speaker •
while adjusting the volume level.
Allow 1ms setting for every 30cm distance
•
between the speaker and the listening position.
Preference Setup
1
Press .
2
Select [Settings] , then press OK .
3
Select [Preference Setup] , then press .
4
Select an option, then press OK .
5
Select a setting, then press OK .
To return to the previous menu, •
press BACK .
To exit the menu, press
• .
Note
See the explanations of the above options in •
the following pages.
[OSD Language]
Selects the default on-screen menu language.
Note
If this product is connected to a HDMI CEC •
compliant TV using a HDMI cable, it switches
automatically to the same menu display
language as per your TV setting.
Video Setup
Advanced Setup
Audio Setup
Preference Setup
EasyLink Setup
OSD Language
Parental Control
Screen Saver
Display Panel
Auto Standby
PBC
Change PIN
English
On
100%
On
On
Sleep Timer Off
Off
[Night Mode]
Makes loud sound level softer and soft sound
level louder so that you can watch the disc at
a low volume, without disturbing others.
• [On] – For quiet viewing at night.
• [Off] – For surround sound with a full
dynamic range.
Note
Applicable only to Dolby encoded DVD-video •
or BD-video.
[HDMI Audio]
Selects the HDMI audio output when you
connect this Home Theater System and the
TV/audio device with a HDMI cable.
• [As Source] – The audio format is not
converted. A secondary audio track on a
Blu-ray disc might not be available.
• [Auto] – Detects and selects the best
suppported audio format automatically.
• [Off] - Disables audio from the TV.
[Speaker Setup]
Optimizes the surround output for the
connected speaker system.
Option Description
[Speaker
Delay] Sets the delay time
for the center or rear
speakers if they are
placed closer to the
listening position, so that
the sound output from
all speakers reach the
listening position at the
same time.
[Speaker
Volume] Sets the volume level
of each speaker and
subwoofer to get the
ideal audio balance.
EN