Philips 639 - Manual (Page 51)

50 Messages
Your phone might have been pre-configured. In this case,
most parameters are already set and you don’t have to change
them (except for
Login , Password and E-mail address
which are up to you when creating an e-mail account).
To enter text and numbers, including specific signs such
as @ or %, see the characters table described page 26.
Settings
Network access
This menu allows you to configure your phone and to
handle the connection to the network, whether GSM
or GPRS, in order to then connect to the appropriate
server that will let you send and receive e-mails.
All options described below are operator and/or
subscription dependent.
1. Press
,
, select Messages > E-mail > E-mail 1 >
Settings and press
,
.
2. Select Network Access and press
,
.
Bearer
This menu allows you to select the type
of network used when launching a
connection.
GSM or GPRS : your mobile will only use the GSM or
the GPRS network for e-mail connections.
GPRS first : your mobile will first try to connect to the
GPRS network, then to the GSM network if the
GPRS network isn’t available when connecting.
Selecting this option you need to have both GSM and
GPRS settings configured.
GPRS settings
This menu allows you to enter or
change the GPRS settings
communicated to you by your operator,
which are: APN , Login and Password . All settings must
be entered as given to you by your operator.
Error messages during connections are mainly due to
incorrect parameters: you should contact your
operator before first use, in order to have the
appropriate GPRS parameters.
GSM settings
This menu allows you to enter or
change the GSM settings
communicated to you by your operator,
which are: Phone number , Auto disconnection , Login
and Password . Enter them as defined.
Phone Number : allows you to enter the phone number
provided by your ISP and needed to establish a
connection. Press
+
or
-
to select:
Bearer
GPRS Settings
GSM Settings
Philips639_APMEA_CTA_GB.book Page 50 Saturday, February 28, 2004 2:40 PM