Philips 639 - Manual (Page 8)

Getting started 7
4. Replace the battery in its slot as shown below:
first place its right side against the right edge of
the phone and press until it clips.
5. Slide the battery door into its slots, metallic
connectors downwards, until it stops.
1. To switch on the phone, press the
)
key.
2. When you switch on the phone, you may be
prompted to enter the PIN code, which is the 4
to 8-digit secret code of your SIM card to protect
it from unauthorised use. It is preconfigured and
communicated to you by your operator or
retailer. To personalise the PIN code, see
“Change codes” page 41.
If you enter a wrong PIN code 3 times, your SIM card
is blocked. To unblock it, you must request the PUK
code from your operator.
3. Enter your PIN code. If you make a mistake,
press
c
. Then confirm by pressing
,
or
#
.
As prompted by the phone at first switch on, set the
date by pressing the appropriate numeric keys (press
c
to erase a number), then press
,
to validate.
Proceed in the same way to set the time.
For complete date and time options, see page 43.
Switch on the phone
Set date and time
Philips639_APMEA_CTA_GB.book Page 7 Saturday, February 28, 2004 2:40 PM